Tools Posts and Standard Set

Turning & Facing Bar CombinationKDK Tool PostThreading & Facing Bar Combination
Extension Turning Bar CombinationParting Bar CombinationClamp Block with ScrewsMaster Bar for Boring Bars

 

Series

Recommended

Lathe Swing

Center Height

Lock Down Bolt Dia.

Max Tool Bit

Tool Post Price

Complete Set Price*

00 .500" & up5/16"1/4"$250$562
08" to 12".750" & up7/16"3/8"$260$578
10012" to 16"1.000" & up7/16"1/2"$280$669
15015" to 18"1.250" & up5/8"5/8"$315$798

200

18" to 24"

1.500" & up

3/4"

3/4"

(optional 1")

$400

$985

*A Standard Set includes Tool Post, 5 Bars, Blank T-Nut and Lock Down Bolt

 

    NOTE: The dovetail dimensions are the same on the 0, 100, 150 and 200 Tool Posts which allows bars from these series to be interchangeable. However, if using larger series holder on smaller tool post, you must have enough center height.

 

    RISER: KDK Tool Posts usually require a Riser Plate between the tool post and the lathe compound to bring tool to lathe center height. A Riser Plate, up to 1-1/8" thick, will be furnished FREE if you specify the lathe center height (See Dimension "A"). Special Riser Plates thicker than 1-1/8" can be made at time and material cost.

 

     MACHINED T-NUT: There is an additional charge for a machined T-Nut. To insure correct size, furnish T-Slot Dimensions.

 

KDK Tools Copyright © 2007 1-800-397-0952